Products
The HPLC Vials provided by Aijiren are often used in Autosampler in chromatographic analysis experiments. 2ml HPLC Vials can be applied to most brands and models of Autosamplers on the market. The quality of HPLC Vial is guaranteed.
1.5 ML/2ML 8-425 Screw Neck Autosampler Vials ND8
Details Products name 1.5 ML/2ML 8-425 Screw Neck Autosampler Vials ND8 Dimension 8mm Cap Color White and Black Septa details White,Red,Blue,1.5mm thickness. Material PP for Cap, PTFE/Silicone for Septa Package 100pcs/Pack Cap type Close top, Open top Septa type Non-slit, Pre-slit Description 1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and c...
View More
1.5 ML/2ML 8-425 Screw Neck Autosampler Vials ND8
1.5ml 9mm Short Thread Autosampler Vials ND9
Details Products name 1.5mL 9mm Short Thread Autosampler Vial ND9 Dimension 9mm Cap Color Blue, Black, Red, Yellow Septa details White,Red,Blue,1mm thickness. Material PP for Cap, PTFE/Silicone for Septa Package 100pcs/Pack Cap type Close top, Open top Septa type Non-slit, Pre-slit Description 1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and ...
View More
1.5ml 9mm Short Thread Autosampler Vials ND9
1.5ml 10-425 Screw Autosampler Vials ND10
Details Products name 1.5ml 10-425 Screw Autosampler Vials ND10 Dimension 10mm Cap Color Black Septa details White,Red,1.5mm thickness. Material PP for Cap, PTFE/Silicone for Septa Package 100pcs/Pack Cap type Open top Septa type Non-slit Description 1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 1.  1.5ml 10-425 Scre...
View More
1.5ml 10-425 Screw Autosampler Vials ND10
1.5mL 11mm Crimp Ring Autosampler Vial ND11
Details Products name 1.5mL 11mm Crimp Ring Autosampler Vial ND11 Dimension 11mm Cap Color Silver Septa details White, Red,1mm thickness. Material Aluminum for Cap, PTFE/Silicone for Septa Package 100pcs/Pack Cap type Open top Septa type Non-slit, Pre-slit Description 1.5 ml vials from Aijiren Technology, Inc with high quality and favorable price. Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 1. ...
View More
1.5mL 11mm Crimp Ring Autosampler Vial ND11
About
Aijiren is a factory that has been engaged in the production of HPLC Vial for 20 years. Aijiren uses high-quality raw materials and a unified assembly line to produce HPLC Vial to ensure consistent HPLC Vial specifications. It is a well-known HPLC Vial manufacturer in southern China.
70+
countries import HPLC Vial
6000
㎡
meters of factory area
120+
technicians and skilled workers
30+
professional sales staff at your service
Case
Aijiren's HPLC Vials are transported from the factory to customers around the world every day. Aijiren will also participate in the exhibition to promote HPLC Vials. It is Aijiren's goal to allow more customers to use high-quality and low-price HPLC Vials.
News
Where the sample actually leaves: four leak paths, ranked by how often I see
10-28
Where the sample actually leaves: four leak paths, ranked by how often I see
A 96-well autosampler tray sat overnight at 8 °C and came back 0.9 mg lighter per vial on the analytical balance the next morning. That is 0.9 µL of mostly water and acetonitrile gone from a 1.5 mL fill in 16 hours. The run itself was fine. The sequence that ran the next afternoon drifted 4.1% in peak area against the bracketing standards, and the only thing that had changed was the time between capping and injection. That is what HPLC vial seal failure looks like when nobody is watching: n...
Read More >
The difference between a guaranteed limit and a typical value is the whole
10-28
The difference between a guaranteed limit and a typical value is the whole
A customer sent me a datasheet last March with “CV < 3%” printed on the dimensional table, and when I asked for the sample size and the gauge they used, the answer was 10 vials pulled from a single mold cavity, measured with a hand caliper at 20 °C. That number is not a specification. It is a snapshot of one cavity on one afternoon, and it was being used to qualify a lot of 240,000 vials across three tools. The run that failed had 0.9 mm of needle penetration scatter on a 250 µL insert, ...
Read More >
In-spec and capable are two different claims, and buyers conflate them
10-27
In-spec and capable are two different claims, and buyers conflate them
A customer sent back 14,000 crimp vials last March because their autosampler was throwing -1 errors on roughly 1 in 300 injections. The neck OD measured 11.02 mm on our gauge, well inside the 11.00 ± 0.15 mm print. Their gripper needed 10.92 mm or less to seat reliably. The print was fine. The dimensional tolerance capability was not: our Cpk on that feature was 0.71, and nobody had looked at it in eighteen months. That is the gap this article is about. Not whether a vial is “in spec,...
Read More >